Featured

## Microprocessor and Interfacing B.Tech 5th semester sample paper Dec-2014

Sample papers are the best source of knowledge for the students towards their preparation of semester examinations. Students will find all the sample papers on this great source of education. We provide almost all the sample papers here in the form notes and in PDF formats. Here is one of the sample paper of B.Tech. Microprocessor and Interfacing is one of the subject students will study or studying in 5th or 6th semester. Students can prepare here with this great source of knowledge. Students can refer this website for their needs of looking for previous sample papers. We even provide the solutions of these sample papers in best possible way. So keep watching this space for more and latest B.Tech sample papers of all the universities  ( MDU, UPTU, KTU, DTU, RTU,).

#### Microprocessor and Interfacing B.Tech 5th semester sample paper Dec-2014Paper Code: EE-309-F

Note : Attempt five questions in total selecting one question from each of the four units. Question No.1 is compulsory.
Q.1.
• (a) Differentiate vectored and non-vectored interrupt.
• (b) What is pipelining ? How does this occur.
• (c) What are the advantages/disadvantages of memory mapped I/O over I/O mapped I/O ?
• (d) Explain the difference between segment and FROC directives.
• (e) Explain hidden DMA.
Q.2.(a). Describe the Pin diagram of 8085 microprocessor.
Q.2.(b). Write an assembly language program to find the number of negative number in the array.

Q.3.(a). What is interrupt ? Explain interrupt structure of 8085 microprocessor with suitable diagram ?
Q.3.(b). Write an assembly language program to transfer 150 byte of data from memory location starting at 21000H to memory addressed by 31000H.

Q.4.(a). Explain BIU and EU of 8086 microprocessor.
Q.4.(b). What is pipelining ?
Q.5.(a). Calculate the physical address represented by :
(i). 1234 H : 0002H
(ii). F2 F2 H : 1234H
Q.5.(b). Describe the 8086 instruction queue. Explain the advantages of program relocation in 8086 microprocessor.

Q.6.(a). Explain directives and identifiers used in 8086 microprocessor.
Q.6.(b). Write a simple assembly language program to add two memory locations where each memory location is one byte wide.

Q.7.(a).Explain NOP and HLT instructions with the help of suitable example
Q.7.(b). Explain intruction execution timing with example.

Q.8.(a). Describe the major components of 8279 keyboard/display/CPU interface with the help of its block diagram.
Q.8.(b). List the operating modes of 8255 PPI chip.

Q.9.(a). Explain 8237 DMA controller with help of Pin diagram.
Q.9.(b). Explain :
(i). Mode-2 strobbed bidirectional I/O of 8255
(ii). Priority Resolver.

## Microprocessor and Interfacing B.Tech 5th semester sample paper Dec-2013

Sample papers are the best source of knowledge for the students towards their preparation of semester examinations. Students will find all the sample papers on this great source of education. We provide almost all the sample papers here in the form notes and in PDF formats. Here is one of the sample paper of B.Tech. Microprocessor and Interfacing is one of the subject students will study or studying in 5th or 6th semester. Students can prepare here with this great source of knowledge. Students can refer this website for their needs of looking for previous sample papers. We even provide the solutions of these sample papers in best possible way. So keep watching this space for more and latest B.Tech sample papers of all the universities  ( MDU, UPTU, KTU, DTU, RTU,).

#### Microprocessor and Interfacing B.Tech 5th semester sample paper Dec-2013Paper Code: EE-309-F

Note : Attempt five questions in total selecting one question from each of the four units. Questions No. 1 is cumpulsory.
Q.1.
• (b) Write a program to find 1's complement of the number
• (c) What is Pipelining ? How does this occur.
• (d) What is wrong with a MOV instruction ?
• (e) Explain following instructions with example : SPHL, XTHL, RET, and IN address.

Q.3(a). What is the functioning of timing and control unit in 8085 microprocessor ? Discuss all its signals in detail.
Q.3(b). Differentiate between vectored and Non-vectored interrupt. Also explain interrupt structure with proper diagram.

Q.4(b). If the first instruction of a program is to be fetched from 12340H. What should the value of CS register be ? The sixth instruction to be fetched is at memory location 1234FH. What should be the value of IP register ?  (Hint : Assume IP to be 000H for first part)

Q.5.(a). Explain the block diagram of 8086 microprocessor.
Q.5.(b). How physical address is computed in 8086 microprocessor ?

Q.6.(a). Explain directives used in assembly language program ? Why are segment directives used.
Q.6.(b). Write a simple assembly program to subtract two memory locations, where each memory location is one byte wide.

Q.7.(a) Explain NOP and HLT instructions.
Q.7.(b) Write a 8086 assembly language program to find largest number in a data array.

Q.8.(a). Explain Pin diagram of 8237 DMA controller.
Q.8.(b). Explain BSR and I/O modes of 8255 PPI chip.

Q.9. Explain (Any two) :
1. Instruction register and Priority Resolver.
2. 8259-A Programmable interrupt controller.
3. 8253/8254 programmable Interval time.

## Microprocessor and Interfacing previous solved sample papers

Sample papers are the best source of knowledge for the students towards their preparation of semester examinations. Students will find all the sample papers on this great source of education. We provide almost all the sample papers here in the form notes and in PDF formats. Here is one of the sample paper of B.Tech. Microprocessor and Interfacing is one of the subject students will study or studying in 5th or 6th semester. Students can prepare here with this great source of knowledge. Students can refer this website for their needs of looking for previous sample papers. We even provide the solutions of these sample papers in best possible way. So keep watching this space for more and latest B.Tech sample papers of all the universities  ( MDU, UPTU, KTU, DTU, RTU,)
Sample papers, MDU B.Tech sample papers of microprocessor and interfacing, 5th semester sample papers, MDU B.Tech sample papers of 5th semester, microprocessor and interfacing 5th semester solved sample papers, Microprocessor and Interfacing MDU B.tech Solved question papers